Slip onto the flange, often referred to as SO flange. It’s a flange that can be slipped over the pipe, and the internal design is slightly bigger than the pipe. The inner dimension of the flange may be slightly larger than the outside dimension of the pipe. The SO flange can be connected directly to pipes or equipment via filet welding between the bottom and top of the flange. It’s used to place the pipe through the holes in the bottom of the flange. Contact Imperial Tech for any query.
The SO Flange is divided into two parts: SO welding plate flange and pipe flange rubbed with steel. Its mechanical properties are similar to the integral flange and the looping flange. The design is straightforward, and the procedure is easy. This is why slip-on Flange welding is extensively utilized in various pipelines for fluids. It is dependent on the type of face.
There is a tiny portion of the bottom face of the slip-on Flange. It is called an angled slip-on flange with a raised face. The purpose of this space is to provide the gasket in the seat for a more effective sealing performance. Since the pressure ratings are higher, the height of this raised face will increase.
A small groove is made on the face of the raised. This form is known as the RTJ type. The function of this groove is to hold the gasket ring. It is also used for sealing.
Compared to RF type. RTJ is specifically designed for use at high pressure. Slip-on flanges employ the process of slip welding to join equipment, and either of the names describes the same flange.
Common outer diameters The most common outer diameters are 1/2 2 3 4” 8 10 12” to 24″. Specially designed outer diameters: Up To 60″. Class range Classes: Class 150, Class 300 400 600, 900 1500 2500(# or LB). PN 2.5 to PN 250. Flange face type is: Face type: (Raised Face), RTJ (Ring Type Joint)
Lower installation costs
Slip-on flanges are typically less expensive than Weld-Neck Flange (welding neck Flange), which is why so many people choose to use these flanges. It is among the most commonly used flanges in low-pressure medium-temperature piping systems.
However, because the bore of the flange is greater than the pipe’s diameter, it requires more welding than other flanges. This means that the durability will not be like the welding neck flange. Each of these elements needs to be considered before choosing the best flange.
Contact us for more details. Please visit Imperiall Technoforge Pvt Ltd for order slip on flange for a budget friendly deal. Imperiall Technoforge Pvt Ltd Is the best in this field.